Welcome to the official website of Jinzhou Dake Mine Machinery Manufacturing Co., Ltd!



Search

Confirm

Cancel

PRODUCTS

Homepage

/

Products

/

Lift The Container

/

JDS, JDG type vertical shaft multi-rope coal skip

Category

Lift The Container

Messages





描述

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

technical parameter

Multi-rope coal skip model				Nominal coal load t	Effective volume m³	Bucket section A×B mm	maximum terminal load KN	hoist wire rope			Balance wire rope
wire rope tank		rigid tank						diameter dt mm	quantity	rope spacing a mm	Round tail rope diameter dt mm	Flat tail rope specification mm	quantity
Same side loading and unloading	Different side loading and unloading	Same side loading and unloading	Different side loading and unloading
model	model	model	model
JDS-4/55×4	JDSY-4/55×4	JDG-4/55×4	JDGY-4/55×4	4	4.4	2000×1100	21.57	21-23	4	200	28-35	76×17 88×15 94×16	2
JDS-6/55×4	JDSY-6/55×4	JDG-6/55×4	JDGY-6/55×4	6	6.6
JDS-6/75×4	JDSY-6/75×4	JDG-6/75×4	JDGY-6/75×4				294.2	22-28	4	300	32-43	100×17 106×18 112×19	2
JDS-9/110×4	JDSY-9/110×4	JDG-9/110×4	JDGY-9/110×4	9	10	2300×1300	431.5	27.5-32.5	4	300	40-48	112×19 118×20 131×21 139×23 146×24 169×28	2
JDS-12/110×4	JDSY-12/110×4	JDG-12/110×4	JDGY-12/110×4	12	13.2
JDS-12/90×6	JDSY-12/90×6	JDG-12/90×6	JDGY-12/90×6				529.6	25-32.5	6	250			3
JDS-16/150×4	JDSY-16/150×4	JDG-16/150×4	JDGY-16/150×4	16	17.6	2400×1550	588.4	31-40	4	300	45-62	166×26 176×27	2

wire rope tank		rigid tank				Skip weight t		Applicable Multi-rope Friction Hoist Models	Main size mm
diameter dt mm	quantity	Section width		spacing		wire rope tank	rigid tank
		For stabilizing tanks up and down wells b1mm	For guidance in wellbore b2mm	For stabilizing tanks up and down wells K1mm	For stabilizing tanks up and down wells K2mm				C	D	E	F	G	H1	H2	H3	H4	H	L	m	n	e	f	p	R	Bucket box coal discharge port section
32-50(determined according to the mine lifting height)	4	160	180	1220	2300	6.5	7.0	JKM1.85×4 JKM2.25×4	1400	800	2000	1250	350	1256	4000	7800	2000	10900	1500	1297	404	450	850	680	2520	1100×850
						6.9	7.3	JKM1.85×4 JKM2.25×4							4900	8700		11800
						7.5	7.9	JKM2.25×4 JKM2.8×4									2100	12030
		180	180	1430	2400	10.7	11.6	JKM2.8×4 JKM3.25×4	1600	830	2100	1450	380	1300	5600	9600	2400	13550	1530	1350	434	500	1050	780	2620	1000×1050
						11.5	12.4	JKM3.25×4							6700	10700		1450
						12.5	13.3	JKM2.8×6										1430				350
		260	180	1690	2500	16.9	17.8	JKM4×4	1850	850	2200	1700	400	1350	7160	11300	2700	15690	1550	1407	454	540	1300	900	2730	1000×1300

illustrate:
1. The weight of the skip includes the weight of the empty skip and the balance iron block, excluding the weight of the additional heavy hammer and curved rail.
2. The ordering unit must propose the lifting wire rope and the balance wire rope to the manufacturer.
3. The oil pump for rope adjustment is not included in this design, and must be ordered separately when selecting.
4. When this skip is used in shallow wells, if its own weight cannot meet the requirements, an additional heavy hammer can be attached to the bottom of the skip, but the nominal tonnage of the weight of the additional heavy hammer must be provided when ordering, so as to order with the skip.
5. If the manufacturer needs to supply the unloading curved track, it must be put forward when ordering.

扫二维码用手机看